PRODUCTION

AND SUPPLY

+358(0) 535-77-100 info@cooltech.fi

Request callback

CMO 24-26-28 and TCMO 28 Mk2

Description for compressors

You can find detailed information on our website: http://coolref.ru/EN
SMC 104-106-108 и TSMC 108 Mk3, S-L-E

The SMC 100 and TSMC 100 compressors have 100 mm diameter pistons, as indicated by the first digit in the type designation. The number of cylinders in the compressor block is indicated by the following two digits, where, for example, SMC 108 is an 8-cylinder compressor. SMC 100 is a one-stage compressor which compresses the gas in a single stage.

In the TSMC 100 two-stage compressors, the gas is compressed in two stages at a ratio of 1:3 between the number of high- and lowpressure cylinders. Thus, a TSMC 108 has 2 high-pressure cylinders and 6 low-pressure cylinders. The SMC 100 and TSMC 100 are available in three versions: an S-type with 80 mm stroke, an L-type with 100 mm stroke, and an E-type with 120 mm stroke.
Тип компрессора можно определить по заводской табличке, расположенной на торцевой стороне компрессора, обращенной в противоположную сторону от муфты или ременного привода. На рисунке ниже показана заводская табличка САБРО.
  25% 33% 50% 67% 75% 100%
СМ0 24     X     X
СМ0 26   X   X   X
СМ0 28 X   X   X X
ТСМО 28   X   X   X

Compressor data for reciprocating compressors SMC 104-106-108 и TSMC 108 Mk3, S-L-E

Operating limits
SABROE prescribes operating limits within which the compressor and any additional equipment must operate. These limits for R717, R22, R134a, R404A, R507 and R407C are shown in the following tables, together with the main data for the compressor.

Compressor
type
Number of
cylinders
Bore
mm
Stroke
mm
Max/min
Speed
RPM
Swept
volume
max RPM*
m3/h
Weight
(max.)
compr. block
kg
SMC    104S SMC    106S SMC    108S 4
6
8
100
100
100
80
80
80
1500/700 1500/700 1500/700 226
339
452
580
675
740
TSMC 108S 2+6 ** 100 80 1500/700 339 775
SMC 104L
SMC 106L
SMC 108L
4
6
8
100
100
100
100
100
100
1500/700 1500/700 1500/700 283 
424
565
580
675
740
TSMC  108L 2+6* 100 100 1500/700 424 775
SMC    104E SMC    106E SMC    108E 4
6
8
100
100
100
120
120
120
1500/700 1500/700 1500/700 339
509
679
600
700
770
TSMC 108E 2+6* 100 120 1500/700 509 800

*    The max speed permitted can be lower than stated here depending on operating conditions and refrigerant; please see the following diagrams.
**    Two - stage compressors (High Stage cylinders and Low Stage cylinders).

Schemes

Spare parts for SMC 104-106-108 & TSMC 108 Mk3 Type S-L и E

Spare parts for SMC 104-106-108 & TSMC 108 Mk3 Type S-L and E  
     
Relevant drawings for compressor SMC TSMC  
SMC 100 Mk 3, S-L-E (delivered after 89 - 10) 0661-521 0661-522  
Cylinder liner ect. SMC  - TSMC 104,106, 108 Mk 3 (after 89.10) 0661-520  
SMC 100 M k3 0661-755 0661-756  
Cylinder liner ect. SMC - TSMC 100 Mk3 0661-605  
     
*) If the compressor runs as heat pump, this must be mentioned when ordering, to ensure a correct delivery
       
       
Pos. Designation Weight each in kg Number each compresssor Part No
SMC 104 SMC 106 SMC 108 TSMC 108
  Compressor frame  
1A-1 Frame SMC 104 240.000 1       3111-065
1A-2 Frame SMC 106 274.000   1     3111-066
1A-3 Frame SMC 108 285.000     1   3111-067
1 A-4 Frame TSMC 108 290.000       1 3111-068
1B-1 Oil levei glass dia. 80 0.230 1 1 1 1 1226-015
1C-1 O-ring PRP 137 - 52,07 x 2,62 *) 0.002 1 1 1 1 1331-140
1D-1 Hexagon head MS x 16 0.010 4 4 4 4 1424-148
  Top cover - air cooled  
2A-1 Top cover S-L, 19.000 1 2 3 2 3113-191
2A-2 Top co^er with fiange S-L 20.500 1 1 1 2 3113-192
2A-3 Top cover E 19.000 1 2 3 2 3113-177
2A-4 Top cover with flange E 20.500 1 1 1 2 3113-176
2C-1 Gasket for top cover 0.020 2 3 4 4 2353-151
2D-1 Hexagon head M14x90 0.120 30 46 62 60 1424-083
2F-1 Hexagon head M14 x 120 0.165 2 2 2 4 1424-090
2G-1 Washer for M14 dia- 28/15 x 2,5 0.010 32 48 64 64 1436-037
  Top cover-water cooled  (see sketch below)  
2A-1 Top cover S-L 19.000 1 2 3 2 3113-191
2A-2 Top cover with flange S-L 20.500 1 1 1 2 3113-192
2A-3 Top cover E 19.000 1 2 3 2 3113-177
2A-4 Top cover with flange E 20.500 1 1 1 2 3113-176
2B-1 Water cover for cover with flange 5.800 1 1 1 2 3113-195
2B-2 Water cover left 5.800 1 1 2 2 3113-193
2B-3 Water cover right 5.800   1 1   3113-194
2C-1 Gasket for top cover  0.020 2 3 4 4 2353-151
2D-1 Gasket for water cover pos. 2B-1 0.020 1 1 1 2 2353-176
2D-2 Gasket for water cover pos, 2B-2/2B-3 0.020 1 2 3 2 2353-175
2E-2 Hexagon head screw M14 x 110 0.150 30 46 62 60 1424-087
2F-1 Hexagon head screw M14 x 120 0.165 2 2 2 4 1424-090
2G-1 Washer for Mt4, dia, 28/15 x 2,5 0.010 32 48 64 64 1436-037
2H-1 Hexagon head screw Mi 0 x 35 0.050 4 5 8 9 1424-193
2J-1 Washer for M10, dia. 21/10,5 x 2 0.008 4 6 8 8 1436-035
  Side cover o sir cooled  
3A-1 Side cover 10.900 2 2 2 2 3113-148
3C-1 Gasket for side cover 0.020 2 2 2 2 2353-151
3E-1 Hexagon head screw M14 x 65 0,045 32 32 32 32 1424-246
3G-1 Washer for M14, dia. 28/15 x 2.5 0.010 32 32 32 32 1436-037
  Side cover - water cooled  
3A-2 Side cover t 15,000 15.000 2 2 2 2 3113-140
3B-1 Water cover 5.800 2 2 2 2 3113-138
3C-1 Gasket for side cover 0.020 2 2 2 2 2353-151
3D-1 Gasket for water cover 0.020 2 2 2 2 2353-154
3E-2 Hexagon head screw M14 x 55 0.065 28 28 28 28 1424-244
3F-1 Hexagon head screw M14 x 35 0.045 4 4 4 4 1424-240
3G-1 Washer for M14, dia. 28/15 x 2,5 0.010 32 32 32 32 1436-037
3H-1 Hexagon head screw M  12 x 40 0.050 2 2 2 2 1424-217
3J-1 Washer for M12. dia. 24/13 x 2,5 0.008 2 2 2 2 1436-036
  End cover at pump end  
4A-1  End cover 17.950 1 1 1 1 3113-028
4B-1 Gasket 0.020 1 1 1 1 2353-011
4C-1 Hexagon head screw M14 x 100 0.150 14 14 14 14 1424-085
40-1 Washer for M14 dia. 28/15x2,5 0.010 14 14 14 14 1436-037
  Bearing cover at pump end  
5A-1 Bearing cover 9.100 1 1 1 1 3113-031
58-1 Hexagon head screw M14 x 35 0,055 6 6 6 6 1424-240
5C-1 Bushing 1.200 1 1 1 1 2132-021
5C-2 Bushing for repair (0,5 mm underside) 1.220 1 1 1 1 2132-022
5D-1 Gascet-0,3 mm 0,005 1 1 1 1 2353-013
5D-2 Gascet-0,5 mm 0,006 1 1 1 1 2353-100
5D-3 Gasket - 0,75 mm 0.010 1 1 1 1 2353-014
5D-4 Gasket -1.0 mm 0.015 1 1 1 1 2353-015
  Bearing cover at shaft seal end  
6A-1 Bearing cover 23.000 1 1 1 1 3113-124
6B-1 Hexagon head screw M14 x 60 0,085 14 14 14 14 1424-245
6C-3 Bushing 1.200 1 1 1 1 2132-021
6C-4 Bushing for repair (0,5 mm undersize) 1.200 1 1 1 1 2132-022
6D-1 Gasket 0.020 1 1 1 1 2353-011
6E-1 Washer for M14, dia. 28/15 x 2,5 0.010 14 14 14 14 1436-037
6F Valve for prelubrication   1 1 1 1 2412-585
6G Nut   1 1 1 1 2313-045
6H Speciai joint   1 1 1 1 2334-027
6J Cap   1 1 1 1 2313-027
6K Joint 3/8"   1 1 1 1 1349-053
6L Alu gasket   1 1 1 1 2356-123
  Shaft seal cover for type SB100  
8A-2 Shaft seal cover  Δ   1 1 1 1 3113-215
8B-1 Gasket for shaft seal Δ   1 1 1 1 2353-005
8C-1 Hexagon head screw M10 x 40  Δ   6 6 6 6 1424-194
8D-1 Hose connection G 1/4" Δ   1 1 1 1 1345-143
8E-1 Plastic hose 3/16" x 300 Δ   1 1 1 1 1241-190
8F-1 Splash ring  Δ   1 1 1 1 1437-295
8G-1 Locking ring dia. 111/105 x 3   1 1 1 1 3126-169
8H-1 Groover pin dia. 4x20   1 1 1 1 1446-081
  Shaft seat type SB 100  
10-3 Shaft seal complete,includes all parts   1 1 1 1 3126-177
  marked Δ            
   for compressor nos,after 98379 incl.            
10-4 Shaft seal to replace incl.part nos   1 1 1 1 3126-170
  10E-2, 10F-1. 10D-1, 10G-1. 10J-1,            
  10L-2            
   for compressor nos.up to 98378 incl.            
10-5 Shaft seal to replace incl.part nos   1 1 1 1 3126-178
  10E-2. 10F-1, 10D-1, 10G-2, 10L-2,            
  10J-1       1    
  for compressor nos.up to 98379 incl.            
10A-1 Retaining flange  Δ    1 1 1 1 3126-166
10B-1 Spring  Δ    10 10 10 10 2142-058
10D-1 O-ring dia. 75,6 X 3,5 *) Δ   1   1 1 1331-075
10E-2 Slide ring(cast iron) Δ   1 1 I 1 3126-175
10F-1 Slide ring (special carbon) Δ   1 1 I 1 3126-168
10G-1 O-ring dia. 82.15 X 3.5 *)   1 1 1 1 1331-077
10G-2 Seating ring  Δ   1 1 1 1 1332-124
10H-1 Locking ring  Δ   1 1 1 1 3126-153
10J-1 Socket cap screw M 5x 16 Δ   4 4 4 4 1413-329
10L-2 Back-up ring  Δ   1 1 1 1 1332-125
10M-2 Locking ring  Δ   1 1 1 1 1437-046
  Oil pump  
11-1 Oil pump 2.400 1 1 1 1 3141-004
11A-1 Housing 0.800 1 1 1 1  
11B-1 Cover 0.800 1 1 1 1  
11E -1 Gear wheel 0.330 1 1 1 1  
11F-1 Gear wheel 0.400 1 1 1 1  
11G-1 Gear wheli for pump pinion 0.660 1 1 1 1 3141-046
11H-1 Gear wheel 0.530 1 1 1 1 3141-047
11J-1 Lock nut M10 x 10,7 0.015 1 1 1 1 1433-080
11K-1 Gasket - paper - 0.2 mm 0.001 1 1 1 1 2353-021
11L-1 Washer for M 10dia. 21/10,5 x 2 0.005 1 1 1 1 1436-035
11M-1 Hexagon head screw M 6 x 30 0.010 4 4 4 4 1424-153
11N -1 Key - 5 x 5 x 12 0.002 1 1 1 1 1526-050
11P-1 Gasket dia. 32/27 x 1,5 0.005 1 1 1 1 2356-139
11Q-1 Hexagon head screw M12 x 25 0.040 2 2 2 2 1424-215
11R-1 Spring washer dia. 12 0.002 2 2 2 2 1437-081
11 S-1 Threaded nipple - 3/4" x 7/8" BSP 0.230 1 1 1 1 2311-007
11T-1 Spring washer - dia- 11,1 /6.1 x 1,6 0.005 8 8 8 8 1437-022
11U-1 Hexagon head screw M 6 x 35 0.012 4 4 4 4 1424-155
11V -1 Guide pin   2 2 2 2 1445-066
  Unloading cylinder  
12-1 Unloading cylinder 1,765 1 1 1   3135-149
  Complete L=75, S=21.5            
12-2 Unloading cylinder 1.790 1 1 1 1 3135-150
  Complete L=100. S=46,5            
12-3 Unloading cylinder 1.815   1 1 1 3135-151
  Complete L=125, S=71,5            
12-4 Unloading cylinder 1.840     1 1 3135-152
  Complete L=150, S=96,5            
12-5 Unloading cylinder (HP) 1,8       1 3135-161
  Complete L=82, S=24,5            
12A-1 Unloading cylinder 1.700 2 3 4 3 3135-147
  (SMC and TSMC LP)            
12A-2 Unloading cylinder 1.800       1 3135-148
  (TSMC HP)            
12B-1 Piston 0.220 2 3 4 4 3135-034
12C-1 Piston rod 75 mm (SMC only) 0.065 1 1 1   3135-041
12C-2 Piston rod 100 mm 0.090 1 1 1 1 3135-042
12C-3 Piston rod 125 mm 0.115   1 1 1 3135-043
12C-4 Piston rod 150 mm 0.140     1 1 3135-044
12C-5 Piston rod 82 mm,grounded 0.090       1 3135-140
  (TSMC HP only)            
12D-1 Threaded plug - 3/8" BSP 0.065 2 3 4 4 2314-025
12E-1 Gasket dia. 25/17 x 1,5 0.002 2 3 4 4 2356-130
12F-1 Seeger ring dia. 52  (SMC and TSMC LP) 0.008 2 3 4 3 1437-155
12G-1 Spring guide 0.040 2 3 4 4 2145-004
12H-1 Spring retainer (SMC and TSMC LP) 0.110 2 3 4 3 3135-057
12J-1 Spring (outer) 0.065 2 2 4 4 2142-056
12J-2 Spring (inner) 0.035 2 3 4 4 2142-055
12K-1 Benzing ring - dia. 9 mm 0,002 2 3 4 4 1437-105
12K-2 Benzing ring - dia. 7 mm  (SMC and TSMC LP) 0.001 2 3 4 3 1437-103
12L-1 Hexagon head screw M10 x 30 0.030 8 12 16 16 1424-192
12M-1 Cover (TSMC HP only) 0.800       1 3135-105
12N-1 Gasket for cover (TSMC HP only) 0.010       1 2353-025
12P-1 Look nut - UNF 3/8" (TSMC HP only) 0.010       1 1433-100
12Q-1 Socket cap screw M4 x 16  (TSMC HP only) 0.010       6 1413-007
12R-1 0-ring PRP n 2 12.37x2,62  (TSMC HP only)") 0.001       1. 1331-013
12S-1 Oasket 100 x 100x2 0.010 2 3 4 4 2354-023
  Frame for unloading mechanism  
  Frame compiete incl. pos. 13E-1           3184-216
13A-1 Suspension rod 0.290 2 3 4 4  
13B-1 Suspension rod 0.290 2 3 4 4  
13C-1 Cross piece 0.330 2 3 4 4  
13D-1 Cross piece 0.330 2 3 4 4 3135-188
13E-1 Countersunk screw M6 x 16 0,020 8 12 16 16 1413-092
  Bracket for unloading mechanism  
14A-1 Bracket with pin 0.065 4 6 8 7 3135-060
14B.1 Spacing ring 0.005 8 12 16 14 2124-003
14C-1 Hexagon head screw M6 x 30 0.010 8 12 16 14 1424-154
14D-1 Spring washer - dia. 6 0.005 8 12 16 14 1437-022
  Rocker for unloading mechanism  
15A-1 Rocker 0.050 8 12 16 16 3135-096
15B-1 Bearing for SMC and TSMC LP 0.006 8 12 16 12 3135-099
15B-2 Bearing for TSMC HP 0.006       4 3135-101
15C-1 Spring retainer 0.001 8 12 16 16 2145-001
15D-1 Spring 0.007 8 12 16 16 2142-061
15E-1 Washer for bearing cup - 0.5 mm 0.001         2114-003
  Crankshaft -all without certificate  
16A-1 Crankshaft for SMC 104S,complete 42.400 1       3121-018
16A -2 Crankshaft for SMC 106S, complete 45.400   1     3121-019
16A -3 Crankshaft for SMC 108S  and TSMC 108S, complete 47.600     1 1 3121-020
16A -4 Crankshaft for SMC 104L, complete 45.600 1       3121-104
16A -5 Crankshaft for SMC 106L, compieie 47.800   1     3121-105
16A -6 Crankshaft for SMC 108L  and TSMC 108L, complete 50.600     1 1 3121-106
16A-11 Crankshaft for SMC 104E, complete   1       3121-213
16A -12 Crankshaft for SMC 106E, complete     1     3121-214
16A -13 Crankshaft for SMC 108E  and TSMC 108E. complete           3121-215
16B-1 Plain washer with pin 0.800 1 1 1 1 2125-084
16C-1 Key- 18 x 11 x 55 0.080 1 1 1 1 2123-005
16D-1 Hexagon head screw M16 x. 55 0.050 1 1 1 1 1424-104
16E-1 Spring washer-dia. 16 0.004 1 1 1 1 1437-027
16F-1 Plug M12 S-type 0.010 1 1 1 1 1413-260
16F-2 Plug 1/4" L-type 0.010 3 3 3 3 1343-141
  Connecting rod  
17-1 Connecting rod, compieie  SMC and TSMC LP 2.700 4 6 8 6 3123-004
17-2 Connecting rod, complete TSMC HP 2.700       2 3123-006
17A-1 Half-section of bearing 0.080 8 12 16 16 2133-003
17A-2 Half-section of bearing  [0.5 mm undersize) 0.080 8 12 16 16 2133-004
17B-1 Bushing for piston pin  SMC and TSMC LP 0.200 4 6 8 6 2132-004
17B-2 Needle roller bearing TSMC HP 0.200       2 1511-275
17C-1 Bolt for connecting rod 0.055 8 12 16 16 2111-068
17D-1 Lock nut-3/8" UNF 0.010 8 12 16 16 1433-116
  Piston with pin and rings  
18-1 Piston with pin and rings S 1.320 4 6 8 8 3124-002
18-2 Piston with pin and rings L 1.320 4 6 8 8 3124-052
18-3 Piston with pin and rings E 1.320 4 6 8 8 3124-065
18A-1 Piston pin 0.500 4 6 8 8 3125-084
18B-1 Piston ring 0.025 8 12 16 16 3125-130
18C-1 OH scraper rings 0.030 4 6 8 8 3125-065
18D-1 Seeger-ring - dia- 40 (inside diameter) 0.005 8 12 16 16 1437-150
  Cylinder Uner with sction valve  
19-1 Cylinder liner with suction valve R717, SMC -TSMC LP, S and L 4.100 4 6 8 6 3112-085
19-2 Cylinder liner with suction valve HFC/HCFC, SMC - TSMC LP, S and L 4.100 4 6 8 6 3112-086
19-3 Cylinder liner with suction valve R717, SMC-TSMC HP, and L 4.100       2 3112-087
19-4 Cylinder liner with suction valve HFC/HCFC, TSMC HP. S and L 4.100       2 3112-088
19-5 Cylinder liner with suction valve R717, SMC -TSMC LP,E 4.500 4 6 8 6 3112-081
19-6 Cyiinder liner with suction valve R717. SMC-TSMC HP. E 4.500       2 3112-097
19A-1 Cylinder liner S and L 3.500 4 6 8 8 3112-065
19A-2 Cylinder liner, E 4.000 4 6 8 8 3112-080
19B-1 Unloading rings with pins, S and L 0.400 4 6 8 8 3135-054
19B-2 Unloading'rings with pins, E 0.500 4 6 8 8 3135-173
19C-1 Washer - dia. 8/4,3 x 0,5 0.001 24 36 48 48 2114-001
19D-1 Spring for unloading ring 0.001 24 36 48 48 2142-034
19E-1 Tension spring - 342 mm 0.015 4 6 8 8 2142-048
19F-1 Ring plate for suction valve 0.035 4 6 8 8 3131-021
19G-1 Valve spring 0.001 24 36 48 48 2141-047
19H-1 Suction vaive retaining plate R717 1.400 4 6 8 8 3132-083
19H-2 Suction vaive retaining plate R12/R22 1.400 4 6 8 8 3132-095
19J-1 Guide ring for discharge valve 0.450 4 6 8 8 3134-008
19K-1 Gasket for cylinder liner - 0,5 mm 0.005 4 6 8 8 2356-111
19K-2 Gasket for cylinder liner - 0,8 mm  0.006 4 6 8 8 2356-233
19M-1 0-ring 107,55 x 3,53') TSMC HP 0.002       2 1331-085
19N-1 Socket cap screw M6 x 30 0.010 24 36 48 48 1413-343
19T-1 Gasket - dia. 163/141 x 0,2 mm 0.001 4 6 8 8 2353-140
  Discharge valve**)  
20-1 Discharge valve - R717 - HP 1.200 4 6 8 2 3136-089
20-2 Discharge valve-R7l7-LP 1.200 4 6 8 6 3136-087
20-3 Discharge valve - HFC/HCFC - HP 1.200 4 6 8 2 3136-088
20-4 Discharge valve - HFC/HCFC - LP 1.200 4 6 8 6 3136-086
20-5 Discharge valve - HFC/HCFC - VHP 1.200 4 6 8   3136-085
20A-1 Discharge valve seat 0.250 4 6 8 8 3133-027
20B-1 Retaining plate - R717 - HP 1.000 4 6 S 2 3132-092
20B-2 Retaining plate - R717-LP 1.000 4 6 8 6 3132-085
20B-3 Retaining plate - HFC/HCPC - HP 1.000 4 6 8 2 3132-093
20B-4 Retaining plate - HFC/HCFC - LP 1.000 4 6 8 6 3132-091
20B-5 Retaining plate - HFC/HCFC - VHP 1.000 4 6 8 - 3132-082
20C-1 Ring plate 0.030 4 6 8 8 3131-015
20D-1 Special screw M 12x 60 0.055 4 6 8 8 1413-121
20E-1 Nut M12x 1,25 0.015 8 12 16 16 1432-075
20F-1 Spring guide 0.015 4 6 8 8 2145-008
20G-1 Vaive spring-R717- HP 0,001 32 4S 64 16 2141-047
20G-1 Valve spring-R717-LP 1.000 24 36 48 36 2141-047
20G-1 Valve spring - HFC/HCFC - HP 0.001 43 72 56 24 2141-047
20G-1 Valve spring - HFC/HCFC - LP 0.001 24 36 48 36 2141-047
20G-1 Valve spring - HFC/HCFC - VHP 0.001 64 96 128   2141-047

 

Compressors are fitted with disharge valves depending on the working conditions.
The valve is selected on the bisis of the refrigerant and the condensing/intermediate pressure temperature of
the plant, indicated in the tabie in 'C. For inst, R22 at TC=53'C=>VHP disharge valve.
     
Refri-gerant Conditions Valve type
R717 TC< 15°C LP
TC≥15°C HP
HFC/  HCFC TC <15°C LP
  45°C R404A-R507   15°C≤ TC<50°C R22  70°C R134a HP
15°C≤ TC<50°C R22 
 70°C R134a
 45°C  R404A-R507  VHP
 TC≥ 50°C R22 
 70°C134a

 

Pos. Designation Weight each in kg Number each compresssor Part No
SMC 104 SMC 106 SMC 108 TSMC 108
  Spring for safety head  
21A-1 Spring 0.400 4 6 8 8 2142-060
  Oil pressure valve  
22A-1 Oil pressure valve, complete 0.450 1 1 1 1 3142-150
22B-1 Gasket 90 x 44 x 1 0.001 1 1 1 1 2354-075
22C-1 Hexagon head screw M12 x 35 0.040 2 2 2 2 1424-216
  Oil charging valve  
23A-1 Oil charging valve, complete 0.300 1 1 1 1 2412-585
23B-1 Threaded reducing nipple 0.155 1 1 1 1 2311-059
23C-1 Socket 0.075 1 1 1 1 2313-035
23D-1 Gasket 0.001 1 1 1 1 2356-123
23E-1 Gasket 0.001 1 1 1 1 2356-140
23F-1 Gasket 0.001 1 1 1 1 2356-283
23G-1 Nut 0.060 1 1 1 1 2313-027
  By-pass valves  
24-1 By-pass valve dia. 20 22 bar TSMC108HP 2.400       1 3137-033
24-2 By-pass vaive dia. 20 24 bar TSMC 108 HP 2.400       1 3137-010
24-4 By-pass valve dia. 28 12 bar TSMC 108LP 3.600       1 3137-046
24-5 By-pass vaive dia. 28 22 bar SMC 3.600 1 1 1   3137-007
24-7 By-pass valve dia, 28 24 bar SMC 3.600 1 1 1   3137-009
24B-1 O-ring for cylinder*) 0.001       1 1331-065
24B-4 O-ring for cylinder*) 0.002 1 1 1 1 1331-067
24C-1 O-ring for cover*) 0.002       1 1331-069
24C-4 O-ring for cover *) 0.003 1 1 1 1 1331-071
24D-1 Hexagon head screw M8 x 25 0.015 4 4 4 8 1424-168
24E-1 Spring washer dia-14,2/8,2 x2 0.002 4 4 4 8 1437-023

 

Pos. Designation Weight each in kg Valve dim. Number each compresssor Part No
SMC 104 SMC 106 SMC 108 TSMC 108
  Stop valves                
25-1 Complete valve, disharge KP   50       1 2414-073
25-2 Complete valve, inlet HP   50       1 2411-261
25-3 Complete valve, disharge LP   65 1 1 1 1 2414-069
25-4 Complete valve, inlet LP   100 1 1 1 1 2414-070
25A-1 Valve housing   50       1 2432-141
25A-2 Valve housing   50       1 2432-141
25A-3 Valve housing   65 1 1 1 1 2432-159
25A-4 Valve housing   100 1 1 1 1 2432-160-
25B-1 Valve bonnet 1.740 50-65 1 1 1 3 2433-028
25B-4 Valve bonnet 4.500 100 1 1 1 1 2433-030
 25C-1 Front part for cone 0.095 50-65 1 1 1 3 2444-090
 25C-3 Front part for cone 0.520 100 1 1 1 1 2444-094
25D-1 Rear part for cone 0.185 50-65 1 1 1 3 2444-091
25D-4 Rear part for cone 1.000 100 1 1 1 1 2444-095
25E-1 Screw for valve cone 0.020 50-65 1 1 1 3 2444-017
25E-4 Screw for valve cone 0.120 100 1 1 1 1 2444-018
25F-1 Gasket for screw dia.31/24 x1,5 0.0001 50-65 1 1 1 3 2356-138
25F-4 Gasket for screw dia, 36/28 x 1,5 0.001 100 1 1 1 1 2356-141
25G-1 Threaded connection 0.180 50-65 1 1 1 3 2445-053
25G-4 Threaded connection 0.400 100 1 1 1 1 2445-061
25H-1 Sealing ring dia. 62/45 x 3 0.004 50-65 1 1 1 3 2354-003
25H-4 Sealing ring dia. 110/90 x 3 0.020 100 1 1 1 1 2354-117
25J-1 Gasket for bonnet dia. 72,39 x 5.33 0.010 50-65 1 1 1 3 1331-154
25J-4 Gasket for bonnet dia. 116,84 x 7 0.015 100 1 1 1 1 1331-198
25K-1 Spindle 0.250 50-65 1 1 1 3 2442-023
25K-4 Spindle 0.480 100 1 1 1 1 2442-028
25L-1 Lock washer for spindle 0.010 50-65 1 1 1 3 2445-019
25L-4 Lock washer for spindle 0.015 100 1 1 1 1 2445-020
25M-1 Packing giand  Compl. with o-rings pos. 25R-1 0.120 50-65 1 1 1 3 2452-132
25M-4 Packing gland  Compl. with o-rings pos- 25R-4 0.250 100 1 1 1 1 2452-133
25N-1 Guide pin 0.002 50-65 1 1 1 3 1445-085
25N-4 Guide pin 0.002 100 1 1 1 1 1445-085
25P-1 0-ring dia. 21,8 x 3,5*) 0.002 50-65 1 1 1 1 1331-020
25P-4 0-ring dia. 28,2 x 3,5*) 0.002 100         1331-024
25Q-1 Nylon washer dia. 28.5/28 x 1,5 0.001 50-65 1 1 1 3 2354-018
25Q-4 Nylon washer dia. 48/34 y. 1,5 0.002 100 1 1 1 1 2354-017
25R-1 O-ring dia.17,12 x 3,5*) 0,001 50-65 2 2 2 2 1331-016
25R-4 O-ring dia.21.8 x 3,5 0.002 100 2 2 2 2 1331-020
25S-1 Hand wheel dia. 120 0.160 50-65 1 1 1 3 1365-036
25S-4 Hand wheel dia. 180 0.800 100 1 1 1 1 1365-035
25T-1 Screw for hand wheel M5 x 10 0.002 50-65 1 1 1 3 1424-140
25T-4 Screw for hand wheei M8 x 16 0.010 100 1 1 1 1 1424-166
25U-1 Washer for hand wheel 0.001 50-65 1 1 1 3 1436-024
25U-4 Washer for hand wheel 0.003 100 1 1 1 1 1436-026
25Y-3 Gasket for welding nipple 0.015 50-65 1 1 1 1 2356-087
25Y-4 Gasket for welding nipple 0.025 100 1 1 1 1 2356-104
25Z-1 Screw valve/compr. M14 x 40 0.050 50 4 4 4 4 1424-241
25Z-3 Screw vaive/cornpr. M14 x 45 0.050 65 4 4 4 4 1424-242
25Z-4 Screw vaive/cornpr. M16 x 45 0.095 100 4 4 4 4 1424-102
25AC-3 Counter flange   65 1 1 1 1 2344-019
25AC-4 Counter flange   100 1 1 1 1 2344-020
25AD-3 Welding nippie dia. 65   65 1 1 1 1 2322-103
25AD-4 Welding nipple dia. 100   100 1 1 1 1 2322-108
25AF-3 Threaded plug 3/4" BSP   65 1 1 1 1 2314-065
25AF-4 Threaded plug 3/4" BSP   100 1 1 1 1 2314-065
25AG-1 Gasket for valve/cornpr.  0.016 50         2354-105
25AG-3 Gasket for valve/compr. 0.016 65 1 1 1 1 2354-105
25AG-4  Gasket for valvs/compr 0.020 100         2354-106
25AH-3 Gasket for plug 0.002 65 1 1 1 1 2356-139
25AH-4 Gasket for piug 0,002 100 1 1 1 1 2356-139
25AJ-1 Screw bonnet/valve M10 x 25   50       8 1424-191
25AJ-2 Screw bonnet/valve M10 x 25   50       8 1424-191
25AJ-3 Screw bonnet/valve M10 x 25   65 8 8 8 8 1424-191
25AJ-4 Screw bonnet/valve M12 x 30 0.040 100 8 8 8 8 1424-215
25AK-3 Screw for counter flange M10 x 40 0.030 65 6 6 6 6 1424-194
25AK-4 Screw for counter flange M12 x 50 50 100 6 6 6 6 1424-219

 

Pos. Designation Weight each in kg Number each compresssor Part No
SMC 104 SMC 106 SMC 108 TSMC 108
  Pressure gauges  
  Suction and pressure gauge
30A-1 R717 1.640 1 1 1 1 1541-108
30A-2 Rl2,R22 and R502 1.620 1 1 1 1 1541-232
30A-3 R22.R134a and R404A 1.620 1 1 1 1 1541-074
30B-1 Nozzle and gasket dia.14/0,8 x 1,5 0.001 1 1 1 1 3146-013
30C-1 Gasket dia. 11/4x 1,5 0.001 1 1 1 1 2356-119
  SMC: discharge pressure gauge  
31A-1 R717 1.380 1 1 1   1541-029
31A-2 R12,R22 and R502 1.400 1 1 1   1541-160
31A-3 R22,R134a and R404A 1.400 1 1 1   1541-075
31B-1 Nozzle and gasket dia. 14/0,8 x 1,5 0.001 1 1 1   3146-013
  TSMC: discharge pressure gauge  
31A-3 R717 1.600       1 1541-101
31A-4 R12, R22 and R502 1.660       1 1541-161
31A-5 R22,Rl34aandR404A 1.660       1 1541-076
31B-1 Nozzle and gasket dia. 14/0,8 x 1,5 0.001       2 3146-013
31C-1 Screws for gauges M4 x 20   6 6 6 6 1412-350
  Oil filter  
33-1 Oil filter complete   1 1 1 1 4524-039
33A-1 Filter element   1 1 1 1 1517-129
33B-1 Gasket   2 2 2 2 2356-202
33C-1 End cover   1 1 1 1 3422-150
33D-1 Rod for filler   1 1 1 1 2112-145
33E-1 Shield for oil filter   1 1 1 1 2158-209
33F-1 Bracket with connection   1 1 1 1 3422-152
33G-1 Distance piece   1 1 1 1 2212-136
33H-1 Rubber gasket   1 1 1 1 1334-012
33J-1 Magnet   3 3 3 3 1517-022
33K-1 iron ring   3 3 3 3 2114-038
33L-1 Washer dia, 17/8.4   1 1 1 1 1436-034
33M-1 Nut M 8   1 1 1 1 1433-073
33N-1 Washer dia-24/13   1 1 1 1 1436-036
33O-1 Nut M12   1 1 1 1 1433-075
33P-1 O-ring *)   1 1 1 1 1331-009
33Q-1 O-ring *)   1 1 1 1 1331-008
33R-1 Cutting ring joint   1 1 1 1 1349-131
  Suction filter  
34A-1 Suction filter open, complete 0.365 2 2 2 1 3425-082
34A-2 Suction filter closed, complete 0.365       1 3425-084
34B-1 Filter bag 0.035 2 2 2 2 3425-083
34C-1 Inset for lifter bag 0.025 2 2 2 2 3424-058
34D-1 0-ring PRP 337 - 75,56 x 5,33 *) 0.008 2 2 2 3 1331-042
34E-1 Cover for suction filter 2.400 2 2 2 1 3422-103
34F-1 0-ring PRP 239 - 91,67 x 3,53 *) 0.003 2 2 2 1 1331-080
34G-1 Hexagon head screw M 12 x 40 0.050 8 6 8 4 1424-217
34H-1 Spring washer dia. 12 0.005 8 8 8 4 1437-026
  Discharge pipe for oil filter  
38A-1 Discharge pipe for oil pump 0.500 1 1 1 1 3141-110
38B-1 Inside pipe connection to control 0.090 1 1 1 1 3141-162
  system (compr. without oil cooler)            
38B-2 Inside pipe connection to control 0.090 1 1 1 1 3141-163
  system (compr. with OSSI oil cooler            
  R717)            
38B-3 Inside pipe connection to contro! 0.090 1 1 1 1 3141-164
  system (compr. with HE8 oH cooler            
  HCFC)            
38C-1 Connection for disharge pipe - 0.120 1       2333-025
  SMC 104            
38C-2 Connection for disharge pipe - 0.190   1     2333-025
  SMC 106            
38C-3 Connection for disharge pipe - 0.180     1 1 2333-026
  SMC 108 and TSMC 108            
38D-1 O-ring PRP 212 - 21,80 x 3.53*) 0.002 2 2 2 2 1331-020
38E-1 O-ring PRP 321 - 29.51 x 5,33*) 0.004 1 1 1 1 1331-039
38F-1 Gasket dia- 27/21 x 1,5 0.001 1 1 1 1 2356-133
38G-1 O-ring dia. 26.58 x 3,5*) 0.002 1 1 1 1 1331-023
  Analogous control and safety  
equipment
39A-1 Gauge panel 0.070 1 1 1 1 3146-042
39B-1 Socket cap screw M10 x 60 0.045 2 2 2 2 1413-382
39C-1 Console   1 1 1 1 2213-142
39D-1 Bar for controls (4 controls)   1 1 1   2213-143
39D-2 Bar for controls (5 controls)   1 1 1 1 2213-144
390-3 Bar for controls (6 controls)   1 1 1 1 2213-145
39D-4 Bar for controls (7 controls)   1 1 1 1 2213-154
39D-5 Bar for controls (US, SMC)   1 1 1   2213-368
39D-6 Bar for controls (US, TSMC)         1 2213-369
39E-1 Hexagon head screw M6 x 12   2 2 2 2 1424-150
39F-1 Spring washer dia. 11/6   2 2 2 2 1437-022
39G-1 Socket cap screw M4 x 6           1412-200
39H-1 Spring washer dia. 7/4           1437-020
39J-1 Socket cap screw M5 x 10   4 4 4 4 1413-330
39K-1 Spring washer dia. 9/5   4 4 4 4 1437-021
  Cooling water connection  See section: Water cooling oi reciprocating compressor  
40A-1 Set of hoses for cooling water SMC104 0.940 1       3185-154
40A-2 Set of hoses for cooling water SMC 106 1.000   1   1 3185-155
40A-3 Set of hoses for cooling water SMC l08 and TSMC108 1.400     1 1 3185-156
40B-1 Hose connection - 3/8" - straight 0.004 12 14 16 16 2334-025
40C-1 Anote - 3/8" 0.009 8 10 10 10 1341-090
40D-1 T-piece 0.015 2 2 2 2 1341-141
40E-1 Hose clamp 0.015 12 14 16 16 1345-168
40F-1 Cable binder   3 3 3 3 1554-062
  Purge valve  
42A-1 Purge valve 0.300 1 1 1 2 2412-585
42B-1 Threaded nipple   1 1 1 1 1349-078
42C-1 Cutting ring 0.135 1 1 1 2 1349-062
42D-1 Nut            
42E-1 Nut 0.070 1 1 1 2 2313-045
42F-1 Connection pipe with collar 0.025 1 1 1 2 2334-027
42G-1 Gasket 0.001 2 2 2 4 2356-123
42H-1 Nut 0.060 1 1 1 2 2313-027
  Pressure and temperature controls  Pressure controls for R717  
45A-1 KP5A 0.300 1 1 1 1 1373-125
45B-1 KP15A 0.460 1 1 1 1 1373-142
45C-1 MP55A 0.900 1 1 1 1 1373-162
42F-1 Connection pipe with collar 0.025 1 1 1 1 2334-027
42G-1 Gasket 0.001 2 2 2 2 2356-123
42H-1 Nut 0.060 1 1 1 1 2313-027
  Pressure controls for R22, R134a and R404A  
45D-1 KP5 0,3 1 1 1 1 1373-123
45E-1 KP15 0.460 1 1 1 1 1373-135
45F-1 MP55 0.800 1 1 1 1 1373-159
  Temperature controls:  
45G-1 KP98 0.720 1 1 1 1 1373-043
45H-1 KP77 0.350 1 1 1 1 1373-044
45J-1 Phail pocket for temperature controls 0.770 1 1 1 1 1377-171
45K-1 Gasket   1 1 1 1 2356-133
  AMR 312 S coupling  
48A-4 Disc pack 1.132 2 2 2 2 1524-157
48B-4 Bolt 0.054 16 16 16 16 1524-165
48С4 Bevel washer 0.010 4 4 4 4 1524-187
48D-4 Lock nut 0.018 16 16 16 16 1524-173
48E-4 Washer 0.008 16 16 16 16 1524-181
  Capacity regulation  
50A-1 Valve body with 1 solenoid valve without coil   1       3143-383
50A-2 Valve body with 2 solenoid valves without coils     1   1 3143-384
50A-3 Valve body with 3 solenoid valves without coils       1   3143-385
50A-4 Valve body with 4 solenoid valves without coils         1 3143-386
50B-1 Coil 220/230V, 50/60 Hz. 10 W 0.260         1372-537
50B-2 Coil 110V, 50/60 Hz, 10W 0.260         1372-538
50B-3 Cod 240V, 50 Hz, 10 W 0.062         1372-539
50C Solenoid vatve (service kit for one solenoid valve)           1372-424
  Crankcase heater  
57A-1 Crankcase heater - 270 W - 115 V, 1 1/4" BSP   1 1 1 1 3181-034
57A-2 Crankcase heater - 270 W - 230 V, 1 1/4" BSP   1 1 1 1 3181-035
57A-3 Crankcase heater - 270 W - 250 V, 1 1/4" BSP   1 1 1 1 3181-036
57B-1 Gasket dia- 50/43 x 1,5 for 1 1/4" BSP 0.002 1 1 1 1 2356-150
80 Sofenoide valve blok, complete with  0.6 mm orifice for oil return. Excl. coil 2.040 1 1 1 1 or 2 1372-179
  Strainer kit consist of:   1 1 1 1 or 2 1372-089
80E Strainer            
80G Al-gasket            
  Service kit consist of:   1 1 1 1 or 2 1372-086
80P Armature tube            
80H Armature            
80K O-ring            
80M O-ring            
80L Ai-gasket            
80N Snap fastener            
  Seal kit consist of:   1 1 1 1 or 2 1372-091
80G Al-gasket            
80K O-ring            
80M O-ring            
80L Al-gasket            
80Q Al-gasket            
  Orifice kit 0,6 mm consist of:   1 1 1 1 or 2 1371-034
80L  At-gasket            
80Q  At-gasket            
80I Orifice 0,6 mm            
  Onftce kit 0,8 mm consist of:   1 1 1 1 or 2 1371-035
80L Al-gasket            
80Q Al-gasket            
80I Orifice 0.8 mm            
  Orifice kit 1,0 mm consist of:   1 1 1 1 or 2 1371-036
80L Al-gasket            
80Q Al-gasket            
80I Orifice 1,0 mm            
  Orifice kit 3.3 mm(for thermopump only) consist of:   1 1 1 1 or 2 1371-037
80L Al-gasket            
80Q Al-gasket            
80I Orifice 3.3 mm            
80J-1 Coil 220/230V, 50/60 H2, 10 W 0.285         1372-537
80J-2 Coil 110V, 50/60 Hz, 10W 0.285         1372-538
80J-3 Coil 240 V, 50 Hz, 10W 0.285         1372-539
80J-4 Coil 24 V. SO Hz, 10 W 0.285         1372-541
  Intermediate pressure connections  
90A-1 Mixing chamber with flange 9.500       1 3114-095
90B-1 Counter flange for mixing chamber 1.700       1 3115-084
90C-1 Intermediate ring 0.392       1 3422-100
90D-1 0-ring PRP 236 - 82,15 3.53 ') 0.002       1 1331-077
90E-1 0-ringPRP241 -98.02x3,5') 0.002       1 1331-081
90F-1 Hexagon head screw M12 x 65 0.065       4 1424-222
90G-1 Hexagon head screw Ml 4 x 55 0.065       4 1424-246
90H-1 Hexagon head screw Ml 4 x 55 0.005       4 1437-026
90J-1 Spring washer dia. 12 0.004       4 1437-030
90K-1 Spring washer dia. 14 0.025       4 1432-066
90L-1 Nut M14 0.003       1 1331-080
90M-1 0-ring PRP 239-91 ,67 x 3,53 *) 0.065       1 2313-027
90N-1 CapGasket dia. 18/10 x 1.5 0.002       1 2356-123
  Oil cooling - type HE8 S for R22  
92A-1 Oil cooler   1 1 1 1 4242-038
92B-1 Stop valve 8MSL 10 0.300 1 1 1 1 1374-171
92C-1 Thermostatic expansion valve TX 2 - 0,5 0.400 1 1 1 1 1371-305
92D-1 Solenoid valve without coil 0.346 1 1 1 1 1372-422
92N-1 Coil 220/230V, 50/60 Hz, -10 W 0.260         1372-537
92N-2 Coil 110V, 50/60 Hz, 10W 0.260         1372-538
92N-3 Coil 240V, 50 Hz, 10W 0.260         1372-539
92E-1 Filter 0.320 1 1 1 1 4522-002
90F-1 Screwed connection GE 10-LR 1/4" 0.050 6 6 6 6 1349-051
92G-1 Single banjo connector DSVW 10-LR 0.160 1 1 1 1 1349-089
92H-1 Threaded nipple 0.110 1 1 1 1 2314-056
92J-1 Threaded plug for 8/6 mm pipe 0.015 2 2 2 2 2314-053
92K-1 Gasket dia. 19/14 x 1,5 - aluminium 0.001 2 2 2 2 2356-124
 92L-1  Connection piece for 1 pipe dia. 8 mm  0.030 2 2 2 2 2333-021
92M-1 Gasket- dia. 27/21 x 1,5 - aluminium 0,001 3 3 3 3 2356-133
  Oil cooling - type OOSl for R717  
93A-1 Oil cooler   1 1 1 1 4242-029
93B-1 Stop valve SN 6   1 1 1 1 2413-010
93C-1 Thermostatic injection TEAT 20-2 0.400 1 1 1 1 1371-240
93D-1 Solenoid valve without coil 0.346 1 1 1 1 1372-422
93N-1 Coil 220/230V. 50/60 Hz, 10 W 0.260         1372-537
93N-2 Coil 110V, 50/60 Hz, 10W 0.260         1372-538
93N-3 Coil 240V, 50Hz.Tow 0.260         1372-539
93E-1  Filter 0.320 1 1 1 1 4522-002
93F-1 Screwed connection GE 10-LR 1/4" 0.050 6 6 6 6 1349-051
93G-1 Single banjo connector DSVW 10-LR 0.160 1 1 1 1 1349-089
93H-1 Threaded nipple 0.110 1 1 1 1 2314-056
93J-1 Threaded piug for dia. 8/6 mm pipe 0.015 4 4 4 4 2314-053
93K-1 Gasket dia. 19/14 x 1.5 - alunimium 0.001 8 8 8 8 2356-124
93L-1 Connection piece for 1 pipe dia. 8 mm 0.030 4 4 4 4 2333-021
93M-1 Gasket dia. 27/21 x 1,5 - aluminium 0.001 3 3 3 3 2356-133
  Chain drive for oil pump  
96A-1 Hub for chain wheel (chranshaft)   1 1 1 1 2126-020
96B-1 Hub for chain wheel (oil pump)   1 1 1 1 2126-019
96C-1 Chain wheel (crankshaft)   1 1 1 1 2126-018
96D-1 Chain wheel (oi! pump)   1 1 1 1 2126-017
96E-1 Chain   1 1 1 1 1521-102
96F-1 Hexagon head screw   5 5 5 5 1424-150
 96G-1 Spring washer   5 5 5 5 1437-022
96H-1 Shield for oil   1 1 1 1 3141-128
98 Thermo pump  
98A-1 Side cover for thermo pump   1 1 1 1 3113-145
98B-1 Monitor box   1 1 1 1 1553-215
  Alien screw M4 x 16   2 2 2 2 1412-204
  Spring washer dia. 4   2 2 2 2 1437-020
98C-1 Level indicator   2 2 2 2 3185-038
98D-1 Outer part for level indicator   2 2 2 2 3185-034
98E-1 Washer dia. 20/13x1.5   2 2 2 2 2356-125
98F-1 Rubber cap   2 2 2 2 1554-194
98G-1 Solenoid valve without coil   1 1 1 1 1372-422
98H-1 Solenoid valve without coil   1 1 1 1 1372-423
98J-1 Coil 220/230V, 50/60 Hz, 10 W 0,285         1372-537
98J-2 Coil 110V, 50/60 H2. 10W 0.285         1372-538
98J-3 Coil 240V. 50 Hz, 10W 0,285         1372-539
98K-1 Check valve   2 2 2 2 1364-008
  Straight joint 10 mm BSP   6 6 8 5 1349-051
  Socket 10 mm BSP   5 5 4 4 1349-101
  T-joint 10 mm   3 4 5 1 1349-041
  Strap for stop valve   1 1 1 1 2212-059
  Cable binder no. 10   1 1 1 1 1554-054
  Allen screw M4 x 12   2 2 2 2 1412-203
  Nut M4   2 2 2 2 1432-035
98L-1 Washer dia. 29/21 x 1,5   2 2 2 2 2356-136
98M-1 VA-joint with nozzle 1,2 mm   3 4 5   2314-097
98M-2 VA-joint with nozzle 0,6 mm         1 2314-100
  Angle joint   3 3 2 1 1349-033
  Angle swivel joint 8 mm   4 4 4   1349-087
  Angle swivel joint 10 mm   3 3 2 1 1349-089
  Angle joint 10 mm       1   1349-112
  Bushing 1/4" x 1/2" RG   2 1 1   2312-013
  Threaded nipple   1 1     2314-056
  Gasket dia. 27/21 x 1,5 Al   2 2 2   2356-133
  Gasket dia. l9/14 x 4 Al   3 3 3 1 2356-283
  Pipe strap dia. 10x15   2     1 1377-117
  Hexagon set screw M6 x 12   1     1 1424-150
  Nut M6   1       1432-061
  Allen screw M5 x 10         1 1413-330
  Washer dia. 12,5/6,4 x 1,6   2       1436-033
  Spring washer for M6         1 1437-021
98N-1 Filter   1 1 1 1 4522-002
98P-1 Stop valve.   1 1 1 1 2412-277
98Q-1 Cooling cover   1 1 1 1 3113-143
98R-1 Gasket for side cover   1 1 1 1 2353-189
98S-1 Hexagon head screw M14 x 80   16 16 16 16 1424-081
98T-1 Oil cooler OSSI   1 1 1 1 4242-029
  Socket 1/4"   1 1 1 1 1349-101
98U Solenoid valve without coil   1 1 1   1372-422
98V Solenoid valve without coii   1 1 1 1 1372-422
98AB-1 Coil 220/230V, 50/60 Hz, 10 W 0.285         1372-537
98AB-2 Coii 110V,  50/60 Hz. 10W 0.285         1372-538
98AB-3 Coil 240V, 50 Hz, 10 W 0.285         1372-539
98X PT100 sensor   1 1 1 1 1373-253
98Y Stop valve   1 1 1 1 2412-277
98Z Non-return valve   1 1 1 1 1364-022
98AA Screw joint   1 1 1 1 2314-105
  UNISAB            
99A-1 Support for UNISAB   1 1 1 1 2213-500
99B-3 Distance washers   4 4 4 4 2212-130
99C-1 Screw for support M10 x 20   2 2 2 2 1424-190
99D-1 Screw for UNlSAB M6 x 20   4 4 4 4 1424-152
99E-1 Washers dia, 22/7 x 1,5   4 4 4 4 1436-025

 

Toots set for compressor
SMC 104-116 Mk3 & TSMC 108-116 Mk3. type S-L-E
 
 Line no. A600 = Normal set, tools set no 3183-109
 Line no. A601 = Extended set, tools set no 3183-110
 Line no. A602A = Tools for coupling (SMC 104-108)
 Line no. A602B =Toots for coupling (SMC 112-116)
 Line no. A603 = Toots for alignment of coupling

 

Pos.No Designation Dimension Line No Part No
A600 A601 A602 A603
A B  
1-1 Clamp with screw, compr. type S and L   4 4       3183-144
1-2 Clamp with screw, compr. type E   4 4       3183-145
2 Tools for shaft seal   1 1       3183-139
3 Tommy screw for cylinder liner   2 2       3183-041
4 Theaded plug for unloading cylinder 3/8"BSP 2 2       2314-017
5 Supporting plate for pistons   8 8       3183-115
6 Spanner for heating cartridge NV 55 1 1       3183-060
7 Trigger for coupling or belt pulley   1 1       3183-059
8 Adjusting jig for coupling         1   3183-105
9-1 Wrench for cylinder screw  NV 4   1        
9-2 Wrench for cylinder screw NV 5   1        
9-3 Wrench for cylinder screw NV 8   1        
9-4  Wrench for cylinder screw NV 10   1        
9-5 Special wrench for shaft seal NV 4   1       1612-392
10-1 Retaining-ring plier J21/G   1        
10-2 Retaining-ring plier A11/G   1        
11-1 Open end and ring spanner NV 10   1        
11-2 Open end and ring spanner NV 17   1        
11-3 Open end and ring spanner NV 19   1        
11-4 Open end and ring spanner NV 22   1        
11-5 Open end and ring spanner NV 24   1        
11-6 Open end and ring spanner NV 27   1        
13-1 Socket wrench NV10   1        
13-2 Socket wrench NV13   1        
13-3 Socket wrench NV17   1        
13-4 Socket wrench NV19   1        
13-5 Socket wrench NV22   1        
13-6 Socket wrench NV24   1 1 1    
13-7 Socket wrench NV27   1        
13-8 Socket wrench NV30   1        
13-9 Socket wrench NV32   1        
13-10 Socket wrench NV9/16"   1        
13-11 Socket wrench NV 3/4"   1   1    
13-12 Socket wrench NV11/16"   1 1      
14 Ratchet handle     1        
15 Speed handle     1        
16 Universal joint for socket wrench     1        
17-1 Extension rod for socket wrench     1        
17-2 Extension rod for socket wrench     1        
19-1 Torque wrench 15-90 Nm     1        
19-2 Torque wrench 40-200 Nm     1 1 1    
20 Coupler for torque wrench 1/2     2 1 1    
21-1 Open spanner for torque wrench NV 11/16"   1 1      
21-2 Open spanner for torque wrench NV 3/4"   1   1    
22 Feeler gauge           1 1

Production of industrial gas compressor units, compressor units, chillers, pump circulating stations, air purgers, refrigeration and freezing systems of any complexity.

Contacts
Aholanmäentie 88, 49630, Hamina, Vehkajoki, Finland
+358(0) 535-77-100 info@cooltech.fi