PRODUCTION

AND SUPPLY

+358(0) 535-77-100 info@cooltech.fi

Request callback

Pump circulating stations

  • Pump circulating stations
  • Pump circulating stations
  • Pump circulating stations
  • Pump circulating stations
  • Pump circulating stations
  • Pump circulating stations
  • Pump circulating stations
  • Pump circulating stations
  • Pump circulating stations
  • Pump circulating stations
  • Pump circulating stations
  • Pump circulating stations
  • Pump circulating stations
  • Pump circulating stations
  • Pump circulating stations
  • Pump circulating stations

Cooltech produces circulating pumping stations based on the use of ammonia or fluorine-containing refrigerants for medium and low temperature systems with capacity of 50-2500 kW.

Approximate production time depends on the order (about 4-8 weeks).

Questionnaire for the selection of a pump circulating station.

  • Description
  • Advantages
  • Options
  • Application
  • Features

These circulating pumping stations are intended for use in refrigeration systems with ammonia or fluorine - containing refrigerants as the primary refrigerant. They are used for mechanical pumping of liquid refrigerant. Ratio of refrigerant overfeed to the evaporator is not less than 3:1. Right selection of pumps and circulation receiver’s capacity helps to improve heat exchange and filing in the pipes in evaporation system of the refrigeration installation. Using of circulating pumping station improves boiling of liquid refrigerant in the evaporative system, traps the liquid, protecting the system from emergency operation and wet compression, controls operating liquid level and ensures that all surfaces of the evaporator are fully wetted for maximum efficiency.

  • Skid mounted;
  • Skid mounted;
  • Factory assembled;
  • Emergency operation protection and wet compression protection for compressors;
  • Maximum heat exchange and pipe filling in evaporation system;
  • Equal distribution of liquid refrigerant in the evaporative system.
  • Dual emergency state protection;
  • Insulation of the separator and all piping;
  • Plating of liquid separator with aluminum / stainless steel;
  • Certification by independent expert organization.
  • Commercial and industrial refrigeration, storage and freezing;
  • Plate freezers;
  • Tunnel fast freezers;
  • Process chilling in chemical industry;
  • Freezing of different physical environments.
  • Fully welded support skid lifting lugs;
  • 2 hermetic liquid pumps (1 main and 1 reserved) for smooth operation;
  • Liquid separator manufactured in accordance with existing standards;
  • Dual pressure relief valve;
  • Level column fitted with visual indication;
  • Electronic solid state level controller;
  • Factory assembled and fully tested;
  • Skid mounted for easy installation on site;
  • Pump suction stop valves;
  • Pump discharge stop/check valves;
  • Individual glycerine filled pump pressure gauge;
  • Service valves.

Production of industrial gas compressor units, compressor units, chillers, pump circulating stations, air purgers, refrigeration and freezing systems of any complexity.

Contacts
Aholanmäentie 88, 49630, Hamina, Vehkajoki, Finland
+358(0) 535-77-100 info@cooltech.fi